Pnp/Pci Configurations - DFI-ITOX GIC68-B User Manual

3
Award BIOS Setup Utility

3.1.6 PnP/PCI Configurations

This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
The settings on the screen are for reference only. Your version may not be
identical to this one.
PNP OS Installed
The options are Yes and No.
Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Disabled The BIOS will not reset the configuration data.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto
Manual
86
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
PNP OS Installed
Reset Configuration Data
X Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
↑↓→← Move
Enter:Select
F5:Previous Values
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
The system will automatically detect the settings for you.
Choose the specific IRQ in the "IRQ Resources" field.
PnP/PCI Configurations
Yes
Disabled
Auto(ESCD)
Press Enter
Disabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Item Help
Menu Level
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot.
ESC:Exit F1:General Help
F7:Optimized Defaults