Preparing For Installation; Table 6-5 Hipath 5000 - Preparing For Installation - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

HiPath 5000 Startup and Administration

Preparing for Installation

To ensure successful installation, you should check the points listed in the table below before

installing the HiPath 5000 software.

HiPath 5000 - Preparing for Installation

Hard disk parti-

The server PC hard disk should be divided into two NTFS partitions. The

main partition C should have a capacity of at least 4 GB and should be re-

served for the operating system and the HiPath 5000 software.

For safety reasons, partitioning with the format FAT 16/32 is not permitted.

Make sure that no unnecessary hardware is connected to the server PC;

any sound cards should be removed.

Access privileg-

To install HiPath 5000, you must log on to the operating system with admin-

istrator rights or, if necessary, log on as the server domain administrator.

LAN integration

Check to ensure that the server PC has been correctly integrated in the cus-

tomer LAN (see Section 6.6.2).

Miscellaneous

All applications running in the background must be closed prior to software

installation.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Table of Contents