Installing Hipath Fault Management - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

HiPath 5000 Startup and Administration

Installing HiPath Fault Management

HiPath Fault Management can read information from the HiPath 3000 and HiPath 5000 system

MIB via SNMP requests. This allows the system to permanently monitor the status of the net-

work components and to include changes of status in the network administrator information.

Insert the installation CD.

The installation program is started via the autorun function. Alternatively you can initiate

Setup via Windows Explorer under <CD-ROM drive letter>:\setup.exe.

Select the language you require for the Setup browser. German (Germany) and English

(USA) versions are currently available.

The system is prepared for installation.

Click Next to start the installation routine.

Important installation information is displayed.

This includes the latest information on installation. Please read this information carefully.

Click Next to proceed with the installation routine.

Select destination path.

Select the folder where you want to install the program.

Confirm the default folder c:\program files\siemens\hipath\ with Next or click

Browse and select a different folder.

Select program folder.

Select the location where the setup should create the new shortcuts.

Confirm the default folder HiPath with Next or select a different folder.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Table of Contents