3.3.28
TMAMF (for selected countries only)
Introduction
The TMAMF (Trunk Module Analog for MultiFrequency Code Signaling) board contains eight
trunks for analog direct inward dialing. The system supports MFC-R2 signaling (default setting),
MFC-R2 with caller ID, tone dialing, and dial pulsing. It is not possible to use DTMF and MFC-
R2 (with or without caller ID) simultaneously.
There are two versions of this board:
S30810-Q2587-A200 for use in HiPath 3750 and HiPath 3700.
●
S30810-Q2587-A400 for use in HiPath 3550.
●
Switches and LEDs
Figure 3-105
TMAMF (S30810-Q2587-Axxx)
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
LEDs
H0 (green)
H100 (yellow)
:
:
:
:
H7
On
0
Lockout switch S501
:
(factory default)
:
7
Subminiature D connector for
DSP diagnosis
boards.fm
Boards for HiPath 3000
Peripheral Boards
3-253