Siemens 3000 Operating Instructions Manual
Hipath cordless office hipath 3000 v3.0 or later
Hide thumbs
Also See for 3000:
- Administration manual (240 pages) ,
- Operating instructions manual (136 pages) ,
- Manual (93 pages)
Related Manuals for Siemens 3000
Summary of Contents for Siemens 3000
-
Page 1: Operating Instructions
HiPath Cordless Office HiPath 3000 V3.0 or later Gigaset active M Operating Instructions Warning! Please read the safety notes before putting the device into service! - Page 2 Safety notes for the mobile telephone Safety notes for the mobile telephone Danger: • • • Note: • • Do not use the mobile telephone in potentially explosive atmos- pheres. Do not install the handset in the vicinity of electronic equipment to avoid mutual interference.
-
Page 3: Table Of Contents
Overview of unit parts Receiver inset Display Display keys Control key Talk key On-hook and on/off key Speakerphone key Missed calls list Star key How to use the keys: page 10 Overview of unit parts Hash key NET/callback key Direct call key Microphone Ringer loudspeaker Screws for batter compart-... - Page 4 Safety notes for using the battery Safety notes for using the battery Caution: • Only use approved batteries. • Avoid contact with fire and water. • Only use the approved C39280-Z4-C373 power supply unit pro- vided for operating the charging shell. Note: Please dispose of the battery, the telephone, the charg- ing shell and the plug-in power supply unit in accordance...
- Page 5 Contents Contents Overview of unit parts......I Operating instructions ......1 Conducting calls –...
- Page 6 Contents Activating or deactivating the ringer volume: ....21 Activating or deactivating the warning tone ..... 21 Activating/deactivating the silent alert.
- Page 7 Contents Group functions ......56 Activating/deactivating group calls ......56 Ringing group on .
-
Page 9: Operating Instructions
The function is not configured for you or your hand- set - please contact your system administrator. • Your communications platform does not feature this function - please contact your Siemens contract partner to upgrade. Conducting calls – the basic func- tions You can use your handset to make both internal and ex- ternal calls. -
Page 10: Display
Conducting calls – the basic functions Step-by-Step and poss. W Enter the required phone no. and correct individual char- possibly Displaying the connection quality The strength of the incoming signal is displayed by the "receive field strength" icon in on or message status: No receive field strength Ò... -
Page 11: Manual Number Redial
Step-by-Step Callbck Conducting calls – the basic functions Press the Talk key or Speakerphone key within 30 sec- onds. The user will be called. The user answers. Conduct the call. Manual number redial The last five phone numbers dialled are automatically saved in the redial list. -
Page 12: Enquiry
Conducting calls – the basic functions Step-by-Step Menu > < Service? > < More features? > < #58=View callbacks? > < Delete? Enquiry You receive a Callback call You will receive the callback, as soon as the user you want has hung up or the first time he uses his tele- phone. -
Page 13: Answering A Call
Step-by-Step either: Menu > < Quit and return? The number is dialled. The user answers. The enquiry starts. The enquiry is ended and you return to the call "on- hold" The second user hangs up. You are reconnected to the first user. -
Page 14: Placing A Call In A Call Pickup Group
Conducting calls – the basic functions Step-by-Step Reject call Menu > < Group Pickup? • place the call on hold and consult with someone else in the room ( • place the call on hold and call a second partner page 4) in order to forward ( the call ( page 51) or to set up a conference... -
Page 15: Call Forwarding
Step-by-Step Menu > < Forwarding on? either: > < 1=all calls? > < 2=external calls only? > < 3=internal calls only? continue: Save Call forwarding This function is for when you leave your desk for a while and want certain calls to be forwarded to your new lo- cation. -
Page 16: Conducting Direct Calls
Conducting calls – the basic functions Step-by-Step Menu > < Divert cancelled? Call the system menu. Select and confirm the menu item. Press the On-hook key to end the process. Conducting Direct Calls Note: • A direct call number must be determined in the room monitor function before making a direct call for the first time page 23,... -
Page 17: Activating Or Deactivating The Keypad Lock
Conducting calls – the basic functions Step-by-Step Activating or deactivating the keypad lock The keypad lock prevents keys from being pressed ac- cidentally, e. g. when carried in a pocket. The keypad lock is automatically deactivated when a call is received and re-activated when the call is over. -
Page 18: Talk Key
Description of the keys Description of the keys Function keys The following function keys are available: « ª Name On-hook and • End a call on/off key • Cancel functions • Jump back to the previous menu (only following © ) •... -
Page 19: Net/Callback Key
NET/Callback key The NET/Callback key provides access to the following functions depend- ing on how it is operated: Operation Press Press and hold (min. 1 second) Control key The control key is assigned different functions depending on the operating situation: Control In idle status Open the mo-... -
Page 20: Display Keys
Description of the keys Display keys Each Display key can be allocated up to two functions. Display key pro- gramming depends on the operating status. A function can be represented by text or an icon. Icon © Î < > Phonebk Enquiry Toggle... -
Page 21: Putting The Handset Into Service
Putting the handset into service Removing the protective cover Remove the protective cover from the display before putting the handset into service. Inserting the batteries One battery is provided with the Gigaset 4000 Micro, while two are pro- vided with the Gigaset 4000 Comfort. The batteries are supplied un- charged. -
Page 22: Charging And Using The Battery
Putting the handset into service Charging and using the battery To charge the battery, insert the mobile telephone into the charging shell with the keypad facing forwards. Note: Only use the approved C39280-Z4-C373 power supply unit to oper- ate the charging shell. The charging status is indicated by the charge status display. -
Page 23: Operating And Charging Times
Operating and charging times The operating times are only achieved after several charging and discharg- ing cycles. Capacity Standby mode (mAh) (hours) up to 250 Permitted batteries The following battery is permitted for the mobile telephone: Nickel Metal Hydrid (NiMH), 500 mAh Order no. -
Page 24: Fitting The Attachment Clip
Putting the handset into service Step-by-Step © either: H/Set Settings Einstellungen Fitting the attachment clip A second battery compartment lid is supplied with the mobile telephone featuring a slot for the attachment clip. Assemble the attachment clip as follows: Opening the battery compartment Unscrew the battery compartment lid with a coin, for example, (1) and remove it (2). -
Page 25: Setting The System Display Language
Step-by-Step either: Language Sprache Deutsch Menü > < Service? > < More features? > < *48= Select language? > < 11=German Select and confirm the menu item. Select and confirm the menu item. Select a language Select and confirm the language you require. Note: For how to return the telephone to the default settings (... -
Page 26: Setting The Handset
Setting the handset Step-by-Step © Sound Settings Handset Volume Save Setting the handset You can change the standard settings of the handset if you are not happy with them. Handset volume When selecting the menu, the tone sounds at the cur- rent setting in speakerphone mode. - Page 27 Step-by-Step © Sound Settings Ringer Settings either: Save ___Ringer Settings___ Time C. Save Open the main menu of the mobile phone. Select and confirm the menu item. Select and confirm the menu item. Fix the setting. Move the cursor down one line. Save the settings.
-
Page 28: Advisory Tones
Setting the handset Step-by-Step Time C. Save Save © Sound Settings Advisory Tones Call the ringer time control menu. Fix the setting. Move the cursor down one line. Save the time control settings. Save the ringer settings. Advisory tones The advisory tones have the following meaning: Advisory Meaning Key tone... -
Page 29: Activating Or Deactivating The Ringer Volume
Step-by-Step Save Beep on Move the cursor down one line. Save the settings. Activating or deactivating the ringer volume: Deactivating the ringer « Hold down the key for a few seconds. A confirmation tone is sounded. The ringer is deactivated. Activating the ringer «... -
Page 30: Activating/Deactivating The Silent Alert
Setting the handset Step-by-Step © Sound Settings Silent alert © H/Set Settings Auto Answer Note: The warning tone cannot be activated if the ring- er was deactivated. Activating/deactivating the silent alert You can activate the silent alert in addition to or in place of the ringing tone. -
Page 31: Setting The Date And Time
Step-by-Step Calendar/Clock Date/Time Save Setting the date and time We recommend setting the date and time to ensure the correct time/date is recorded for all calls. You can choose between 12-hour display (am, pm) and 24-hour display. Note: Do not switch off the handset after you have made the settings, otherwise the date and time will be reset. -
Page 32: Resetting The Defaults
Setting the handset Resetting the defaults This function allows you to reset your mobile phone to the defaults, e.g. if you want to pass it on to someone else or reset it. The following table shows the handset’s default settings: Setting Audio Auto. - Page 33 Step-by-Step © H/Set Settings Reset Handset The handset features are handled as follows when re- setting the defaults: Feature Sound settings Direct call number System registration Telephone directory Telephone Services menu depends on the version Redial list Open the main menu of the mobile phone. Select and confirm the menu item.
-
Page 34: Conducting Calls - Enhanced Functions
Conducting calls – enhanced functions Step-by-Step Save Conducting calls – enhanced functions Speakerphone mode Features Speakerphone mode offers you the following advantag- • Other persons can listen to and participate in the call. • Your hands are free. • When dialling, you can hear the ring tone, for exam- ple, without having to lift the handset to your ear. -
Page 35: Number Redial
Step-by-Step Automatic Redial either: Deactivating speakerphone mode You can deactivate speakerphone mode and switch to handset mode during the call: Press the Talk key. Note: If you wish to replace the handset in the charg- ing shell during a call, e. g. because the battery is empty, hold down the Speakerphone key. -
Page 36: System Speed Dialling
Conducting calls – enhanced functions Step-by-Step Delete Entry Copy to Directory Save Entry Deleting a phone number from the redial list Call the redial list. Press the top or bottom of the control key to select the required phone number. ©... -
Page 37: Individual System Speed Dialling
Step-by-Step Menu > < Service? > < * 7=Use speed dialing? Menu > < Service? > < * 92=Change Speed Dial? Abb. dial no: > < Change entry? Conducting calls – enhanced functions Dialling a speed dialling destination Press the Talk key. Call the system menu. -
Page 38: System Telephone Directory
Conducting calls – enhanced functions Step-by-Step Save Menu > < Service? > < * 7=Use speed dialing? Abb. dial no: «o Phonebk > < Enter the external phone number (with external code). The key "#" means that the subsequent digits are sent as DTMF tones. -
Page 39: Handset Directory/Carrier List
Step-by-Step New Entry Save Entry Conducting calls – enhanced functions Dialling the entry Confirm your selection. The selected number is called. Quitting the redial list Î Press the Display key. Note: Phone numbers dialled from the "System tele- phone directory" are not stored in the redial list. Handset directory/carrier list You can save a total of 200 entries in the redial list and carrier list for your handset. -
Page 40: Directed Assignment Of An Msn (Multiple Subscriber Number)
Conducting calls – enhanced functions Step-by-Step either: Display Number Delete Entry Finding and dialling an entry Open the redial list or the net carrier list. You can scroll to the required entry or enter the first let- ter of the relevant entry. If necessary, press a key several times in succession to enter the required letter. -
Page 41: Making Calls Using Identification Codes
Step-by-Step Menu > < Service? > < * 41=Temporary MSN? MSN no.111 111: Menu > < Service? > < * 60=Account code? Project Code: Save Please dial. Conducting calls – enhanced functions Press the Talk key. Call the system menu. Select and confirm the menu item. -
Page 42: Using The Handset As A Second Line
Conducting calls – enhanced functions Step-by-Step Menu > < Service? > < * 508=Temporary Phone? Home Extn. no.: PIN no: <Name> <Name>:... Using the handset as a second line You can use your mobile phone for an outgoing call as if it were another line (temporary phone). -
Page 43: Deactivating The Phone Number Display
Step-by-Step Menu > < Suppress call ID? Call ID suppressed Menu > < Restore caller ID? Call ID restored Menu > < Service? > < * 59=Pickup - directed? Conducting calls – enhanced functions Deactivating the phone number display Your service engineer can deactivate the display of your phone number and name on the called party’s display for external outgoing calls. -
Page 44: Activating/Deactivating Do Not Disturb
Conducting calls – enhanced functions Step-by-Step either: > < Accept call? > < Select extension? continue: Menu > < Do Not Disturb ON? Menu > < Do Not Disturb OFF? Call the additional menu. Select and confirm the menu item. Note: If several users are called simultaneously, only the first user called is displayed. -
Page 45: Call Charge Display
Step-by-Step Menu > < Service? > < * 65=Show call charges? Conducting calls – enhanced functions Call charge display After a call has ended, the display shows the connec- tion charges for the current call as standard. If the costs are to be displayed continuously during an outgoing call, this function must be requested from the carrier. -
Page 46: Entrance Telephone
Conducting calls – enhanced functions Step-by-Step Menu > < Service? > < * 84=Trace call? either: > < Open door? Menu Call the system menu. Select and confirm the menu item. Select and confirm the menu item. The caller is identi- fied in the attendant console. - Page 47 Step-by-Step > < Service? > < * 61=Open door? Menu > < Service? > < * 89=Door release Menu > < Service? > < * 89=Door release OFF? Conducting calls – enhanced functions Select and confirm the menu item. Select and confirm the menu item. Enter the internal phone number for the door opener.
-
Page 48: Tds Telephone Data Service
Conducting calls – enhanced functions Step-by-Step Menu > < Service? > < * 42=Tel. data service? TDS code: ª o Menu TDS telephone data service You can use your mobile phone to control connected computers and their programs, e. g. hotel services or information systems. -
Page 49: Sending A Signal To The Network
Step-by-Step > < Service? > < * 90=Control Relay Menu > < Service? > < #90=Control Relay Off? Menu > < Service? > < * 51=Recall to Net- work? Conducting calls – enhanced functions Select and confirm the menu item. Select and confirm the menu item. -
Page 50: External Call Forwarding With A Multiple Subscriber Number
Conducting calls – enhanced functions Step-by-Step Menu > < Service? > < Trunk FWD on? either: > < 1=immediate? > < 2=on no answer? > < 3=on busy? continue: Save External call forwarding with a multi- ple subscriber number If your communication system is connected to an ISDN multiple device line, then you can forward all incoming calls from the public network through your multiple sub- scriber number (MSN) to an external destination. -
Page 51: Using Night Service
Step-by-Step Menu > < Service? > < Forward by Network OFF? Menu > < Night answer on? either: > < *=default? Save Conducting calls – enhanced functions Deactivating call forwarding to a "trunk" Press the Talk key. Call the system menu. Select and confirm the menu item. -
Page 52: Using Dual-Tone Multifrequency Signalling
Conducting calls – enhanced functions Step-by-Step Menu > < Night Service - OFF? Menu > < Service? > < * 53=Tone dialling? Deactivating night service Press the Talk key. Call the system menu. Select and confirm the menu item. Press the On-hook key to end the process. Using dual-tone multifrequency sig- nalling Your handset operates on the basis of digital informa-... -
Page 53: Parking/Activating Calls
Step-by-Step Menu > < Service? > < * 56=Park a call? Menu > < Service? > < #56=Retrieve call? Conducting calls – enhanced functions Parking/activating calls You can park up to ten calls (i.e. place them on hold) and then reactivate them at other telephones in your com- munication system. -
Page 54: Conducting Calls - With Multiple Users
Conducting calls – with multiple users Step-by-Step 2ndCall Conducting calls – with multiple users Call waiting You need to speak to a user in your communication sys- tem urgently, even though his line is busy. You can send a call waiting signal during his call to let him know you want to talk to him. -
Page 55: Call Waiting Tone Off/On
Step-by-Step either: Menu > < Quit and return? Menu > < Waiting tone off? Menu > < Waiting tone on? Ending the second call Call the system menu. Select and confirm the menu item. Press the On-hook key. The following message appears on the display: "Recalling". -
Page 56: Disabling/Enabling Automatic Call Waiting
Conducting calls – with multiple users Step-by-Step Menu > < Service? > < Call wait. term. off? Menu > < Service? > < Call wait. term. on? « £ Ÿ Override Disabling/enabling automatic call waiting You can disable/ enable automatic call waiting signalling for a second call during a telephone conversation. -
Page 57: Transferring Calls
Step-by-Step <Name> Menu > < Start transfer? either: Menu > < Transfer? Conducting calls – with multiple users The override is established. The user name or phone number, to whom/which the call has been transferred, is displayed. Override is ended when you hang up the handset. Note: During override •... - Page 58 Conducting calls – with multiple users Step-by-Step Menu > < Start transfer? either: Menu > < Transfer? You receive a recall • immediately if you have made a mistake, • 45 seconds after the transfer if the required user does not answer. If you do not answer recalls, another telephone defined by the service engineer is called (intercept station).
-
Page 59: Placing A Call On Hold
Step-by-Step Enquiry Menu > < Quit and return? Menu Callbck Toggle Conducting calls – with multiple users Placing a call on hold You can interrupt a call temporarily if, for example you want to talk to someone else in the room. The line is placed "on hold". -
Page 60: Conducting A Conference
Conducting calls – with multiple users Step-by-Step Menu > < Start conference? Menu > < Conference? Menu > < Conference? Conducting a conference You can connect up to 5 internal or external partners with each other in a telephone conference. You can in- clude up to 4 external users in the conference. - Page 61 Step-by-Step Menu > < Add party? Menu > < Conference? Menu > < End conference? Conducting calls – with multiple users Expanding a conference You can expand an existing conference to include up to five users. You are connected with two or more partners in a con- ference call.
- Page 62 Conducting calls – with multiple users Step-by-Step > < View conf parties? > < Exit list? Menu > < View conf parties? > < Remove party? Viewing the conference parties list Call the additional menu. Select and confirm the menu item. The first party is dis- played.
-
Page 63: Using The Second Call Function
Step-by-Step Menu > < Withdraw? Conducting calls – with multiple users You are connected with two or more partners in a con- ference call. Call the system menu. Select and confirm the menu item. The first party is dis- played. Press the On-hook key. -
Page 64: Group Functions
Group functions Step-by-Step Menu either: > < Leave hunt group? > < Join hunt group? continue: Menu either: > < Leave hunt group? Group functions Activating/deactivating group calls If this has been configured by the service engineer, you belong to one or more groups of users who can be reached by means of a hunt group or group call phone number. - Page 65 Step-by-Step > < Join hunt group? continue: > Group 1 Group 2 either: > < Leave hunt group? > < Join hunt group? continue: Menu either: > < Leave hunt group? > < Join hunt group? continue: Group 1 Group 2 continue: Select and confirm the menu item.
-
Page 66: Ringing Group On
Group functions Step-by-Step Menu > < Service? > < *81=Ringing group Add ext to group? Save > < Add another ext? Save Menu > < Service? > < *81=Ringing group > < Display/Clear? Ringing group on You can have calls to your handset signalled acoustically on up to five other telephones. -
Page 67: Ucd Call Distribution
Step-by-Step > < Delete? Menu > < Service? > < UCD Menu? > < *401=Log on? Menu > < Service? > < UCD Menu? > Scroll to the required user. Call the additional menu. Select and confirm the menu item. The addition of the first user is cleared. - Page 68 Group functions Step-by-Step > < #401=Log off? Menu > < Service? > < UCD Menu? > < *402=Log on? Menu > < Service? > < UCD Menu? > < #402=Not available? Menu > < Service? Select and confirm the menu item. Press the On-hook key to end the process.
- Page 69 Step-by-Step > < UCD Menu? > < *403=Work on? Menu > < Service? > < UCD Menu? > < #403=Work off? Menu > < Service? > < UCD Menu? > < *404=UCD night on? Menu > < Service? Select and confirm the menu item. Select and confirm the menu item.
-
Page 70: Mulap Group (Multiple Line Application)
Group functions Step-by-Step > < UCD Menu? > < #404=UCD night off? Menu > < Service? > < UCD Menu? > < *405=Calls in queue? Menu > < Service? > < More features? Select and confirm the menu item. Select and confirm the menu item. Press the On-hook key to end the process. - Page 71 Step-by-Step either: > < #85=Leave hunt group? > < *85=Join hunt group? continue: Menu > < Service? > < More features? > < *501=Forward Line: either: > < 1=all calls? > < 2=external calls only? > < 3=internal calls only? Save Select and confirm the menu item.
- Page 72 Group functions Step-by-Step Menu > < Service? > < More features: > < #501=Forward Line: Off? Forwarding off Press the Talk key. Call the system menu. Select and confirm the menu item. Select and confirm the menu item. Select and confirm the menu item. Enter a line number.
-
Page 73: Message Functions
Step-by-Step Menu > < Advisory msg. on? either: > < 0 = Will return at: 1 = On vacation until: If necessary Save > < Enter message text Message functions The message functions enable you to react to voice mail/ call back services of the communication system or of other users or to initiate information features your- self. -
Page 74: Sending/Calling Text Messages
Message functions Step-by-Step Save continue: Menu > < Absence Text OFF? Enter the required advisory message. Typing errors cannot be corrected. Note: For example if you want to enter the third char- acter on a key: press the relevant key three times in succession. - Page 75 Step-by-Step Menu > < Send Message? Message to: either: > < Please callback Someone is waiting > < Enter message text continue: Send Msg. from: > < Text? Send a text message Press the Talk key. Call the system menu. Select and confirm the menu item.
-
Page 76: Answering A Message Or Voice-Mail Message
Message functions Step-by-Step You have new mes- sages received J either: Messages received Menu > < Display Messages? > [ continue: Msg. from: > < Text? > < Time/date sent? either: > < Call Sender? > < Delete? continue: Answering a message or voice-mail message An advisory message appears when you have received a message or voice mail. - Page 77 Step-by-Step either: > < Messages received Menu > < Display Messages? Messages received Menu > < Display Messages? > [ > Msg. from: > < Text? > < <Text> Time/date sent? > < at:... either: > < Call Sender? Check for a new voice-mail message Press the message key.
-
Page 78: Caller List
Message functions Step-by-Step > < Delete? continue: Menu > < Caller list? Select and confirm the menu item. The entry is deleted. Press the On-hook key to end the process. Caller list If you are unable to answer an external and/or internal call, this call request is stored in a caller list. - Page 79 Step-by-Step > < Call? Menu > < Save number? Menu > < Missed Call List? > < Delete? Calling back a caller Call the menu. Select and confirm the menu item. The connection is set up. Note: If a connection is established, the user is auto- matically deleted from the caller list.
-
Page 80: Additional Functions
Additional functions Step-by-Step Calendar/Clock Alarm Clock Save Additional functions Handset alarm clock function When the alarm clock is activated, it rings every day at the set time. The alarm clock is deactivated during au- tomatic number redial and when the room monitor function is active. -
Page 81: Handset Appointment Reminder Function
Step-by-Step Calendar/Clock Alarm Clock Save Deactivating the alarm clock An appointment reminder call is signalled in the same way as an incoming call. Press any key during an alarm call. Deactivating the alarm clock The handset is in idle status. ©... - Page 82 Additional functions Step-by-Step Calendar/Clock Set Appoints. Save Calendar/Clock Set Appoints. Save Activating the appointment reminder function The handset is in idle status. © Open the menu. Select and confirm the menu item. Select and confirm the menu item. Fix the setting. Move the cursor down one line.
-
Page 83: System Appointment Function
Step-by-Step Missed Appoint. Calendar/Clock Missed Dates F G [ Displaying an unconfirmed appointment If you have failed to confirm an appointment reminder call, a Display key is assigned the "Missed Appoint." function. This unconfirmed appointment must also be saved in a missed dates list. Display an appointment. - Page 84 Additional functions Step-by-Step Menu > < Service? > < *46=Timed reminder Remind at (HHMM): either: > < One time only? > < Daily? continue: Save Menu > < Service? > < #46=Timed reminder off? Reminder at... either: > < Delete? >...
-
Page 85: Setting The Room Monitor
Step-by-Step © Family/Fun Confirming an appointment The handset rings and the appointment is displayed. Press the Talk key. Press the On-hook key. The appointment is confirmed. Setting the room monitor This function enables a room to be monitored acousti- cally from another location. The handset should be at least 1 or 2 metres from the expected source of the sound. -
Page 86: Walkie-Talkie Mode
Additional functions Step-by-Step Room Monitor Change if necessary W Enter the required phone no. and correct individual char- Save Save Select and confirm the menu item. Fix the setting. Move the cursor down one line. Open the input field for phone numbers. acters as necessary using the "Delete"... - Page 87 Step-by-Step © Family/Fun Walkie-Talkie Silent Activating walkie-talkie mode Open the main menu of the mobile phone. Select and confirm the menu item. Select and confirm the menu item. If the walkie-talkie mode is activated. Deactivating walkie-talkie mode The "Off" key is used to deactivate walkie-talkie mode. Making and answering calls Calling handset Call...
-
Page 88: Selecting A Base
Additional functions Step-by-Step © H/Set Settings Select Base Base 1 Best Base Selecting a base If your handset is registered at multiple bases, then you can set a specific base or the base with the best recep- tion as the base to be used. The handset then switches automatically to this base. -
Page 89: Telephone Blocking
Step-by-Step Menu > < Service? > < * Change PIN? Telephone blocking Telephone lock code programming You can protect your handset against unauthorised ac- cess (thereby safeguarding personal data) by entering a 5-digit code to lock and unlock it. To change a code, first enter the old code and then key in the new code twice. -
Page 90: Locking/Unlocking The Handset
Telephone blocking Step-by-Step Menu > < Changeover on? Menu > < Changeover off? Locking/unlocking the handset You can lock your handset to prevent external dialling and programming, thereby preventing unauthorised use in your absence, for example. Prerequisite: You have defined a personal code or use the default code "00000". -
Page 91: Central Telephone Lock/Locking/Unlocking Other Handsets
Step-by-Step Menu > < Service? > < More features? > < * 943=Telephone Lock? either: Central telephone lock/locking/un- locking other handsets If you have the appropriate authorisation, you can lock and unlock other handsets to prevent unauthorised use. If the user has locked his handset and has forgotten the individual password he has set, you can unlock the phone again using this function. -
Page 92: System Functions
System functions Step-by-Step Menu either: > < Suppress call ID? > < Service? > < *41=Temporary MNS? > < Service? > < More functions? > < #58=View callbacks? continue: either: « o ªo continue: System functions The system functions can be called up via the menu of directly by entering codes. -
Page 93: Functions And Codes
Functions and codes Functions Automatic call wait. term. on Automatic call wait. term. off Camp on tone OFF Camp on tone ON Accept call waiting Call caller list - Call - Save phone number Advisory msg. on Advisory msg. off DND on DND off UCD:... - Page 94 System functions Functions Conference: - on - off Call charge display Use speed-dialling number Change speed dialling Toggling Tone dialling Night answer on Night answer off Park - Parking a call - Retrieve call Account code Callback View callbacks Suppress phone number Temporary phone number (MSN) Restore phone number Ringing group on...
- Page 95 Functions Timed reminder on Timed reminder off Door release ON Door release OFF Door open Pickup group Pickup, directed Forwarding on Forwarding off Trunk FWD on Trunk FWD off Central telephone lock Return to held call System functions Codes « ª...
-
Page 96: Appendix
Appendix Appendix Troubleshooting Some malfunctions can be resolved without outside intervention. The fol- lowing table provides a list of such malfunctions. Error No display. No reaction to key- stroke. De-crescendo tone se- quence during input. The line "Base n" flash- es (n= 1 - 4). -
Page 97: Cleaning The Handset
Error Possible cause The following, for ex- Handset is blocked. ample, appears: Base 1 Outgoing and incoming calls and activation/de- activation are not possi- ble. Cleaning the handset To clean the handset and the charging shell, simply wipe them with a damp or antistatic cloth;... -
Page 98: Accessories
The S30807-K6718-X charging shell is used for charging the battery and storing the mobile telephone safely. Further information about this is avail- able on request. Please contact your nearest Siemens sales office. Power supply unit The power supply unit is used for operating the charging shell. Only use the permitted C39280-Z4-C373 power supply unit. -
Page 99: Declaration Of Conformity
CE symbol. Extract from original declaration "We, Siemens AG, declare, that the above mentioned product is manufac- tured according to our Full Quality Assurance System certified by CETE- COM ICT Services GmbH with the registration number "Q810820M" in compliance with ANNEX V of the R&TTE-Directive 99/05/EC. -
Page 100: Index
Index Index Accessories ...90 Activating ...1 Activation ...1 Advisory message ...65 Advisory tones ...20 Anniversary function ...31 Anonymous calling ...35 Answering a message ...68 Answering calls ...35 Answering voice mail ...68 Appointment Delete ...76 Appointments Confirming ...77 Attachment clip ... I Fitting ...16 Auto. - Page 101 Connecting parties ... 54 Connection quality ... 2 Control key ... I Control relay ... 40 Date Setting ... 23 Deactivating ... 1 Default state ... 24 Dialling Before line seizure ... 2 Dialling after line seizure ... 2 Dialling preparation ...
- Page 102 Index ...32 Mulap group Activating call forwarding Deactivating call forwarding Deactivating/ activating group calls Forwarding a line ... 63 Multiple subscriber number NET carrier list key ... 11 NET key ... I Night service ... 43 Number redial ... 27 Deleting an entry ...28 List...
- Page 103 UCD night service ... 61 Unit parts ... I Walkie-talkie mode ... 78 Warning tone ... 21 Wrap-up time ... 60 Index...
- Page 104 The required features are only binding if they are expressly agreed when the contract is signed. Order no. A31003-G1531-C102-1-7619 • Printed in Federal Republic of Germany • BA 30.10.2002 © Siemens AG 2002 • Information and Communication Networks • Hofmannstr. 51 • D-81359 Munich • Stamp of Approval: For sales queries:...