Other Device Information
Low Battery Warning
The Thermostat displays this screen when
the batteries are running low on charge
and should be replaced This screen will
only display once per day the first time the
screen wakes
1 Press the SIDE button to dismiss this
warning
2 Turn the thermostat mode to OFF (from
heat or cool)
3 Replace the batteries
4 Turn the thermostat mode back on to HEAT or COOL
Your settings will be retained and the thermostat will automatically
reconnect to the Z-Wave Network
Network Disconnected
The Thermostat displays this screen when
it has lost its connection to the Z-Wave
Network This screen will only display once
per day the first time the screen wakes.
1 Press the SIDE button to dismiss this
warning
2 Go to the Home > Installer > Network
menu, and follow the procedure to
include the Thermostat to the Z-Wave
Network
Firmware Updating
The Thermostat displays this screen when it
is updating its firmware.
Wait until the firmware update is complete
(about 15 minutes) and this screen is no
longer displayed before attempting to use
the Thermostat
Vivint Element CT200 Operation Guide
Customization
NETWORK
DISCONNECTED
OK
Updating
39