Radio Thermostat CT200 User Manual page 43

Advanced Z-Wave
The Thermostat supports compliant mapping of the Z-Wave
BASIC_COMMAND_CLASS to the CT thermostat "Energy Saving" and
"Comfort Mode" as follows:
• Basic Set (Value = 0x00) = Set Energy Saving Mode
• Basic Set (Value = 0x01-0x63 & 0xFF) = Set Comfort Mode
Energy Savings applies a 4° F setback to the existing set point
temperature to comply with EPA recommendations for energy
savings
Anti-theft
The Anti-Theft Command Class disables a subset of supported/
controlled command classes in the thermostat if the thermostat
is being excluded from and included to a Z-Wave network (This
thermostat supports version 2 of the Anti-Theft Command Class )
This command class is typically used when installing a thermostat
in a public location, such as a hotel room or conference center The
command class allows the user to lock the thermostat to the actual
Z-Wave network and to render it useless if it is removed from the
local network without being unlocked Another application would be
to protect service-provider-owned products from leaving the service
providers network before they are paid for
Disabled Commands With Engaged Anti-Theft protection
Basic Command
Indicator Command
Multilevel Sensor Command
Thermostat Operating State
Command
Thermostat Fan State Command
Version Command
Battery Command
Anti-theft Command
Vivint Element CT200 Operation Guide
Information
®
Clock Command
Manufacturer Specific Command
Thermostat Mode Command
Thermostat Fan Mode Command
Thermostat Setpoint Command
Configuration Command
Association Command
Multi Channel Command
(Only supported if a humidity sensor is
present )
Z-Wave
®
®
43