Table of Contents
Advertisement
Product Name:
CT101
Document Title: CT101 Operation Guide
Document Type Code:
Part Number:
1111-002-002
28dec11
edits mtf
22nov11 initial rel mtf
5Jan12 DG Edits add FCC/IC page
Blank page remove
before binding
IBOE
NOTE: Append this Operation
IB to the Install IB to make one
IB-booklet. Need a divider tab
between the 2 sections.
Advertisement
Table of Contents
Related Manuals for Z-Wave CT100
Summary of Contents for Z-Wave CT100
- Page 1 Product Name: CT101 Document Title: CT101 Operation Guide NOTE: Append this Operation Document Type Code: IBOE IB to the Install IB to make one Part Number: 1111-002-002 IB-booklet. Need a divider tab between the 2 sections. 28dec11 edits mtf 22nov11 initial rel mtf 5Jan12 DG Edits add FCC/IC page Blank page remove before binding...
- Page 2 Operation Guide CT100 The CT100 communicating Z-Wave3 thermostat operates via a high- quality, easy-to-use touch screen. To set or adjust your CT100, simply top cover touch your finger firmly to the screen. The screen will automatically light up and you will hear a “beep.” Do not use a sharp or metallic...
-
Page 3: Home Screen
Before you operate the CT100 please get familiar with these basic control screens. All the CT100 functions are accessed through these screens: HOME, MENU, PROGRAM and MANUAL. The CT100 touch screen technology allows you to select (by touching) an item and change it using the +/- arrows or the time arrows. -
Page 4: Menu Screen
MENU Screen The MENU screen is the gateway to many functions or settings of the CT100. It is displayed when you press the MENU button. [See page 10 for details] Chirp set Filter Timer set Set Time Touch this to turn the... -
Page 5: Manual Screen
MANUAL Screen The Manual Screen control screen is where you can make temporary changes to your CT100’s operation. From the Full HOME screen, touch the main temperature display to use this screen. [See page 13 for details] Manual Override Indicator... -
Page 6: Initial Settings
Initial Settings Press MENU to to access the following commands (from HOME screen). Set day of the week Touch the Day of the week area to cycle through the days of the week to select the current day. Set time of day Touch the Time of Day arrows to move the time selection forward or backward until it displays the current time. -
Page 7: Menu Screen Functions
CT100 setting and the room temperature required before the heating or cooling system will turn on—from 0.5° to 2.0° F (.25° to 1° C). For example, if SWING is set to 2.0° F and the CT100 is set to 70°F Target Temperature, the heat cycle will start when room temperature drops to 68°F. - Page 8 Set - Touch this to switch the temperature display scale from o F to o C . FILTER - AIR FILTER ALERT - The CT100 can be programmed to remind you when the HVAC sytem’s air filter needs changing. Touch FILTER. The display will show the usage to date.
- Page 9 For FULL lock : Touch the (1 bar) icon again for 5 seconds to go to full lock. No changes can be made in full lock (2 bars). Once locked, the CT100 will respond just to MENU. To UNLOCK , Press MENU. Touch and hold icon for 5 seconds for 2 bars (if not there already).
-
Page 10: Manual Screen Functions
Recommend 2°F for very cold climates and the 4°F for warm climates. MANUAL Screen Functions The CT100 has 4 manual override commands. The manual screen is accessed by touching the large current temperature display in the middle of the HOME screen. - Page 11 F at night.] EMER (in HEAT PUMP type) If you set your CT100 for HEAT PUMP with auxiliary heat, EMER function is available on the MANUAL screen. If you touch EMER, it displays EMER|ON. Your HEAT PUMP is disabled and auxiliary heat is your sole source of heat.
-
Page 12: Other Functions
The mode button sets the CT100 to HEAT COOL or OFF modes. Press it once to step to the next mode. If the CT100 is in OFF and you want to return to the mode you were previously in, touch the OFF indicator on screen. -
Page 13: Simple Screen
Hold down the PROGRAM button for 12 seconds to access the limited display screen. Hold down the PROGRAM button for 12 seconds to leave the limited display screen. RESET button The RESET button re-boots the CT100 processor. It does not effect the user programs that have been stored in permanent memory. Compressor Protection The CT100 has a minimum cycle time of 4 minutes to protect your compressor in cool and in heat pump (if you have one). -
Page 14: Communicating Thermostat
Communicating Thermostat The CT100 has a built in Z-Wave radio. This allows your thermostat to communicate with other systems. To connect to a network - To remove from a network - 1] Press Add Devices on your Z-wave controller. The controller will go into Discover Devices mode. -
Page 15: Fcc And Ic Statement
FCC and IC Statement FCC Regulatory Information: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.