Other Functions; Mode Button; Fan Button; Reset Button - Radio Thermostat CT100 Operation Manual

Hide thumbs Also See for CT100:

Table of Contents

Other Functions

The mode button sets the CT100 to HEAT, COOL, AUTO, or OFF modes. Press it once to step to the

next mode. If the CT100 is in OFF and you want to return to the mode you were previously in, touch

the OFF indicator on screen.

The fan control is normally in AUTO mode, meaning that the fan operates automatically with the

HVAC system and the thermostat. When the fan button is pressed the fan goes ON; the fan will run

continuously in this manual override until switched back to AUTO by pressing the FAN button again.

[NOTE: Fan ON function is available in the OFF mode to allow simple ventilating.]

The RESET button re-boots the CT100 processor. It does not effect the target

temperatures that have been stored in permanent memory.

Compressor Protection -

The CT100 has a minimum cycle time of 4 minutes to protect

your compressor in cool and in heat pump (if you have one). The Home screen will show a small

clock icon during this time and the compressor will not come on until the 4 minute delay is over.

RH% Display

To display relative humidity touch the time display on the HOME screen - touch again to return.

Table of Contents

Show Quick Links

Table of Contents