Equipment - Radio Thermostat CT200 User Manual

Equipment

Selecting HVAC & Heat Types
1 From the Thermostat's Home
screen, press and hold the
SIDE button for 3 seconds
The Settings menu opens
2 Highlight Installer, then press
the SIDE button The Install
Settings menu opens
3 Highlight Equipment, then
press the SIDE button The
Equipment menu opens
4 Highlight Heating, then press
the SIDE button The Heating
menu opens
5 Under Heating Type, press
the SIDE button until your
heating type is displayed:
Forced Air, Heat Pump,
Hydronic, or Radiator
6 Under Fuel, press the SIDE
button until your heating
fuel is displayed: Natural
Gas, Propane, Fuel Oil, or
Geothermal and Electric For
Heat Pump systems, this field
is labeled Aux Fuel
7 Under Stages, press the
SIDE button until your
system's heating stage type is
displayed: 1 (single), 2 (dual),
1 + Auxiliary, or 2 + Auxiliary
For Heat Pump systems, this
field is labeled Aux. Stages.
Note: Auxiliary stages are only
available if you select Heat Pump
as the heating type
Vivint Element CT200 Operation Guide
Selecting Heat Pump Settings
1 From the Thermostat's Home
screen, press and hold the
SIDE button for 3 seconds
The Setting menu opens
2 Highlight Installer, then press
the SIDE button The Install
Settings menu opens
3 Highlight Equipment, then
press the SIDE button The
Equipment menu opens
4 Highlight Heat Pump, then
press the SIDE button The
Heat Pump menu opens
5 Highlight Wire, then select the
letter corresponding to the
terminal the Heat Pump is
connected to: O or B
6 Under Stages, press the
SIDE button until your
system's heating stage type
is displayed: 1 (single), or 2
(dual)
TYPE
Forced Air
FUEL
Natural Gas
STAGES
1
Heat Types
Customization
HEATING
35