Info - Radio Thermostat CT200 User Manual

Info

Information about the Thermostat device includes:
:
Power
Battery:
Heating:
Active Relays:
Network:
The current software and firmware versions the unit is
Software:
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight Info, then press the SIDE button
Information about the Thermostat displays
3 Press UP or DOWN to scroll through the available information
Installer
Installer settings control the following Thermostat functions:
EQUIPMENT: heating, cooling, humidity control, and fan behavior
COMFORT: swing, differential, and other settings
NETWORK: the Thermostat's connection to a Z-Wave Network
TESTING: the Thermostat's connection to your equipment
RESET: resetting the Thermostat's software to factory default
!
WARNING
Be sure to turn the thermostat operating mode to OFF before
changing HVAC setup
32
The power supply the unit is currently using (batteries,
C-wire, and/or transformer)
How much battery power is currently left, if batteries
are installed in the unit
The heating setting the system is currently using
The wires currently being used by the system
Whether or not the unit is currently connected to a
Z-Wave network
using
Vivint Element CT200 Operation Guide
Customization