Radio Thermostat CT200 User Manual page 42

Z-Wave Reference
®
The Thermostat can work in the same network with any other
certified Z-Wave device, regardless of manufacturer/vendor.
See your specific Z-Wave® controller's User Manual for detailed
instructions on operating your thermostat through the network
Behavior Note: When power is first applied to this device
it will broadcast a Hail message followed by a Node
Information frame This behavior is to maintain backwards
compatibility with older controllers that work with this line
of devices
Z-Wave Lifeline
The following commands can be sent to lifeline:
• Command Class Sensor Multilevel - Sensor Multilevel Report
• Command Class Basic - Basic Report
• Command Class Thermostat Mode - Thermostat Mode Report
• Command Class Thermostat Operating State - Thermostat Operat-
ing State Report
• Command Class Thermostat Fan Mode - Thermostat Fan Mode
Report
• Command Class Thermostat Fan State - Thermostat Fan State
Report
• Command Class Thermostat Setpoint - Thermostat Setpoint Report
• Command Class Multichannel - Multi Channel Command Encap-
sulate
These can be accessed via an Association Group Info Command List
Get for group 1 (lifeline)
42
Vivint Element CT200 Operation Guide
Z-Wave
®