Mounting Plate - Radio Thermostat CT200 User Manual

Attaching the Mounting Plate to the wall
1 Carefully pull the labeled wires through the center hole in the

mounting plate

2 Position thermostat for best appearance to cover the hole in the
wall
3 Mark first and drill a ¼ in. (6mm) hole at each screw location.
4 If you are mounting the Thermostat to sheet rock or if you are
using the old mounting holes, use the plastic anchors provided
5 Attach the Thermostat to the wall with the screws provided
Vivint Element CT200 Installation Guide
Wiring
9