Adjustment Of Parking Brake - Baroness LM315GC Owner's Operating Manual

1 Reel cutter drive belt
2 Bolt
3 Flexible wire housing
Engine Tension Belt
Caution
Be sure to stop the engine before adjusting
the belts.
1. Tilt the underseat cover forward and open
the cover.
2. Open the hood.
3. Press the middle of the belt with your finger
to check the belt tension.
Engine Tension Belt_001
1 Engine tension belt
4. Loosen the nut to adjust the length of the
spring.
1
Engine Tension Belt_002
1 Nut
A 50.0 mm (1.969 in)
5. Lock it with the nut.
Maintenance (Main Body)
1
i352yo-001
A A
i352yo-004

Adjustment of Parking Brake

Danger Danger
If the brake wire is cut, the machine will be
unable to stop. This would be extremely
dangerous.
If the brake wire is cracked or damaged,
replace it with a new one immediately.
If the parking brake is not sufficiently effective
when you pull the parking brake lever, adjust
the brake wire.
Adjust the parking brake by tightening the
brake wire adjustment bolt.
1
Adjustment of Parking Brake_001
1 Parking brake lever
2 Lock nut
3 Adjustment bolt
4 Brake wire
LM315GC
Maintenance
2 3
4
ulabms-003
Page 5-15