2Wd/3Wd Selector Switch - Baroness LM315GC Owner's Operating Manual

LM315GC
Handling Instructions

2WD/3WD Selector Switch

Caution
When switching between 2WD and 3WD
operation, make sure to stop the machine
completely.
Caution
In case of 2WD/3WD model, travel in 2WD
mode since it is dangerous to travel on steep
downward slopes, wet road surface or
downward slopes of wet lawn in 3WD mode.
Rear tire going into a skid may cause loss of
traveling control.
Important
When the reel rotation switch is set to the
"MOW" (reel rotation) position, regardless of
the position of the 2WD/3WD selector switch,
3WD is selected.
When the traveling mode is switched to 3WD,
the red LED in front of the 2WD/3WD selector
switch lights up.
Note:
Depending on the specifications, this function
may not be available.
The 2WD/3WD selector switch is located in the
operation panel.
( - #30420)
Flipping the switch forward turns to 3WD
mode and flipping backward turns to 2WD
mode.
When the traveling mode is switched to
3WD, the red LED in front of the 2WD/3WD
selector switch lights up.
A B
1
2WD/3WD Selector Switch_001
Page 4-34
(#30421 - )
Flipping the switch up selects 3WD mode,
and flipping it down selects 2WD mode.
When the traveling mode is switched to
3WD, the red LED above the 2WD/3WD
selector switch lights up.
ofo39l-003
1 2WD/3WD selector switch
A 3WD
B 2WD
1
A A
B
2WD/3WD Selector Switch_002
1 2WD/3WD selector switch
A 3WD
B 2WD
Operation of Each Section
ofo39l-006