Hydraulic Oil - Baroness LM315GC Owner's Operating Manual

LM315GC
Handling Instructions

Hydraulic Oil

Inspection of Hydraulic Oil
1. Raise the mower units and maintain that
position on a level surface.
2. Make sure that the oil level is at the middle
of the oil gauge.
Inspection of Hydraulic Oil_001
1
3. Check underneath the machine for oil
leakage.
Hydraulic Oil Supply
Important
Do not mix different types of oil.
Important
Use Shell Tellus S2M46 (or equivalent) as
hydraulic oil.
1. If the oil level is low, open the tank cap and
supply oil until the oil level reaches the
middle of the oil gauge on the hydraulic
tank.
Hydraulic Oil Supply_001
1
2
Page 4-6
1
Oil gauge
1
2
dmhzyz-009
Tank cap
Oil gauge
2. Tighten the tank cap securely.
3. Start the engine, raise and lower the mower
units, and turn the steering wheel left and
right.
4. Move forward and reverse repeatedly
several times.
5. Raise the mower units and maintain that
position on a level surface, and then check
to see if the oil level is at the middle of the
oil gauge. If necessary, supply oil.
6. Check underneath the machine for oil
leakage.
olekci-005
Inspection Before Use