Tire; Brake; Belt; Engine - Baroness LM315GC Owner's Operating Manual

LM315GC
Handling Instructions

Tire

Inspection of Tires
1. Check the pneumatic pressure of the tires.
2. Make sure that there are no cracks,
damage or abnormal wear.
(For green/For field)
Smooth 18 ×
Front wheel
9.50-8 2P
Smooth 18 ×
Rear wheel
9.50-8 2P
(For teeing ground)
Pillow Dia 18 ×
Front wheel
8.50-8 4P
Pillow Dia 18 ×
Rear wheel
8.50-8 4P

Brake

Inspection of Parking Brake
1. Make sure that the brake is not applied any
longer when you pull the parking brake
lever.
2. Make sure that the brake is not applied
even slightly when you press the push
button to release the parking brake lever.

Belt

Inspection of Belt
Caution
If you have removed the cover during
inspection, make sure that you replace it in
the original position securely.
If the cover remains removed, the operator
may come in contact with the rotating objects
or belt, possibly resulting in injuries.
Important
A slacking or damaged belt may cause the
cutter rotation speed or operation speed to be
insufficient for operation.
Page 4-10
Pneumatic
Tire size
pressure
80 kPa
(0.8 kgf/cm
80 kPa
(0.8 kgf/cm
Pneumatic
Tire size
pressure
100 kPa
(1.0 kgf/cm
100 kPa
(1.0 kgf/cm
1. Press the middle of the belt with your finger
to check the belt tension.
2. Make sure that there are no cracks,
damage or abnormal wear.

Engine

Inspection of Engine-Associated Parts
For details on handling the engine, please
refer to the separate Engine Operating
Manual.
1. Check the fuel system parts for loosened or
2
)
cracked joints and leakage. Replace the
parts if necessary.
2
) 2. Blow compressed air to clean any grass or
flammable materials that may be attached
inside or around the muffler.

Engine Oil

Inspection of Engine Oil
2
)
For details on handling the engine, please
refer to the separate Engine Handling Manual.
2
)
Important
Securely tighten the oil level gauge and oil
filler cap.
1. Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, and then check
the oil level.
2. Position the machine so that the engine will
be level, then insert the oil level gauge all
the way to check the oil level.
1
Inspection of Engine Oil_001
1 Oil level gauge
Inspection Before Use
bgmiun-010