Baroness LM315GC Owner's Operating Manual page 79

2. Remove the wire.
3. Remove the right/left bolts.
4. Remove the rear wheel Assy.
2
1
3
1 Wire
2 Bolt
3 Rear wheel Assy
5. Remove the bolts.
1
1 Bolt
6. Remove the tire from the wheel mounting
base.
Caution
Refer to the Tightening Torque Table.
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
Important
Tighten the bolts in the tightening order
(crosswise).
Maintenance (Main Body)
75uxaw-005
Rear Tires_001
75uxaw-005
Rear Tires_002
Maintenance
For installing the rear tires, reverse the
removing procedure.
[3WD]
1. Securely place the jack beneath the jack-up
points of the engine mount frame area, and
then raise it until the tire lifts off the ground.
(See "Jack-up Points" (Page 5-6) .)
2. Remove the wire.
3. Remove right/left the bolt A(s).
4. Remove the bolt B at the center.
5. Remove the brake shoe Assy.
6. Remove the brake drum.
2
1
3
4
Rear Tires_003
1 Wire
2 Bolt A
3 Bolt B
4 Brake shoe Assy
5 Brake drum
7. Remove the bolts.
1
Rear Tires_004
1 Bolt
8. Remove the tire from the wheel mounting
base.
LM315GC
5
75uxaw-005
75uxaw-005
Page 5-13