Mower Pedal; Up Switch - Baroness LM315GC Owner's Operating Manual

Mower Pedal

Caution
Do not keep depressing the mower pedal after
an operation.
It may cause malfunction.
1
Mower Pedal_001
1 Mower pedal
2 Green LED
The mower pedal is located on the left of the
foot area in front of the driver's seat.
Depressing the pedal switches the mower units
between the up and down positions.
When it is switched to the down position, the
green LED on the steering column lights up.
The Up/Down speed of the mower unit is
affected by the engine rotation speed. When
the engine rotation is at low speed, the Up/
Down speed is at low as well.
Important
Even if the reel rotation switch is set to the
"MOW" (reel rotation) position, when the
mower units are raised, the reel cutters
(cutting cylinders) stop rotating.
Important
Operation of the mower pedal cannot raise the
mower units to the highest position.
When traveling, keep pressing the up switch
to raise the mower units to the highest
position.
Operation of Each Section

Up Switch

2
6yy3b4-006
Handling Instructions
Caution
Up switch should be used only when the
height of the mower unit is not sufficient.
Do not press this switch when the mower unit
is at lowered position.
Otherwise, the harness may get damaged.
The up switch is located in the operation panel.
If the height of the mower unit is not sufficient
for traveling etc, keep pressing the up switch to
operate the magnetic valve to raise the mower
unit to the highest position.
( - #30420)
1
Up Switch_001
(#30421 - )
1
Up Switch_002
1 Up switch
LM315GC
1dndt8-001
1dndt8-004
Page 4-33