Oil Leakage - Baroness LM315GC Owner's Operating Manual

LM315GC
Handling Instructions
8. Make sure that the traveling pedal is
neutral.
9. Set the ignition key to "START" position.
Important
In the case that there are still air bubbles in
the fuel from air-bleeding plug even after 15
seconds or more pass after setting the ignition
key to "START", pause for 30 seconds or
more and then repeat the same steps.
10. If the starter rotates and air bubble of the
fuel from the air-bleeding plug has gone,
return the ignition key slowly to "OFF"
position and tighten the plug.

Oil Leakage

Inspection of Oil Leakage
Caution
When performing maintenance on the
hydraulic system, lower the mower units.
After approximately 50 hours of operation,
some tightened portions may be loosened
and oil may leak.
Be sure to retighten the parts.
Check the bottom of the machine for oil
leakage.
Page 4-14
Inspection Before Use