Coolant - Baroness LM315GC Owner's Operating Manual

Cleaning of Radiator
For details on handling the engine, please
refer to the separate Engine Handling Manual.
Important
An unclean radiator cover may cause
overheating or damage to the engine.
It may also cause malfunction of the hydraulic
system.
Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the radiator has been contaminated with
dust, be sure to clean it.
Especially, after operating the machine in a
dusty environment, it is important to remove
dust as soon as possible.
1. Remove the bolt.
2. Open the radiator cover.
3. Pull up the dust-proof mesh upward and
remove it.
1
4
3
Cleaning of Radiator_001
1 Bolt
2 Radiator cover
3 Dust-proof mesh
4 Radiator
4. Carefully clean the front and back of the
radiator with water or compressed air.
Inspection Before Use
Handling Instructions

Coolant

Inspection of Coolant
For details on handling the engine, please
refer to the separate Engine Handling Manual.
Warning
Do not touch the radiator or coolant during
engine operation or right after the engine has
been turned off.
Otherwise, you may get burned due to high
temperatures.
Caution
Inspection should take place after the engine
has well cooled down.
1. Make sure that the coolant level in the
reserve tank is between "FULL" and
"LOW."
va4j43-004
FULL
1
LOW
Inspection of Coolant_001
1 Reserve tank
LM315GC
ckvlsx-001
Page 4-3