Adjustment Of Belt Tension - Baroness LM315GC Owner's Operating Manual

LM315GC
Maintenance
Caution
Refer to the Tightening Torque Table.
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
Important
Tighten the bolts in the tightening order
(crosswise).
For installing the rear tires, reverse the
removing procedure.

Adjustment of Belt Tension

Caution
Be sure to stop the engine before adjusting
the belts.
Important
Make sure that the belt has the specified
amount of tension.
If the belt becomes slack due to frequent use, it
may jump or slip.
In addition, if it is overtightened, it may wear
prematurely.
If necessary, adjust it, and always check the
belt for appropriate tension.
Fan Belt
Caution
Be sure to stop the engine before adjusting
the belts.
For details on handling the engine, please
refer to the separate Engine Handling Manual.
Open the hood.
1. Press the middle of the belt with your finger
to check the belt tension.
Page 5-14
2. If the belt is too slack, loosen the nuts and
bolts fixing the alternator, and then move
the alternator to adjust the tension.
2
1
2
3
4
5
A
Reel Cutter Drive Belt
Caution
Be sure to stop the engine before adjusting
the belts.
1. Tilt the underseat cover forward and open
the cover.
2. Open the hood.
3. Press the middle of the belt with your finger
to check the belt tension.
4. If the belt is too slack, loosen the bolts and
move the flexible wire housing (the pulley
attached) with the spanner to adjust the
tension.
Reel Cutter Drive Belt_001
3
5
4
A
1
mzdn8n-002
Fan Belt_001
Fan belt
Blade
Alternator
Nut
Bolt
7.0 - 9.0 mm (0.276 - 0.354 in)
3
2
1
eqhyge-001
Maintenance (Main Body)