Pim Setting - Samsung MIM–B18BN User & Installation Manual

PIM Setting

1
Click [System Settings]
menu screen appears.
2 Click [Setting] which is next to PIM of device list.
Enter administrator's password and then click [OK].
3 Click [Edit] which is on the bottom of PIM setting page.
[Edit] will change to [Cancel].
4
Select a field you want to change.
Meter Value ( 0~99999.9, to one decimal place)
Meter Type / Pulse rate
- Electricity (1~10000)
- Water (1~10000)
- Gas (0.001~10, to three decimal places)
Channel Status
Time Setting
PIM Password (Number)
You should tick the check box of the channel you want
to change.
5
Click the check boxes to select the channel applying for the setting.
6 Click [Save].
If you press [Cancel], webpage will refresh and it goes
back to the state before the modification.
[Tracking] when DMS2.5 web page
41
E-