Samsung MIM–B18BN User & Installation Manual page 38

Tracking (Continued)
Disconnect All Devices
Function
Initialize searched device status in DMS2.5.
Monitoring and controlling of all the connected devices to DMS2.5 will be stopped
when you use this function.
Connect searched device to the other channel and execute tracking.
If the other device is searched in the channel you want to use, use 'Disconnect all
devices' function.
If you use this function, DMS2.5 device connection status will be initialized.
Disconnect All Devices
1 Select [System Settings] menu and click [Tracking].
2 Click [Disconnect all devices].
3 Enter administrator's password and then click [OK].
4 Disconnect all devices information window pops up. Check it and click [OK] to
continue.
"Reading data from DMS2.5. Please wait. " message appears.
5
After completing disconnect all devices operation, page will be refreshed.
Note After executing disconnect all devices function, device search status of
DMS2.5 will be initialized.
You should execute tracking again after using disconnect all devices
function.
38
E-