Setting additional functions of ERV wired remote controller (Detailed settings)
Set, Cancel
1. For detailed settings, press the
seconds.
You will enter the detailed setting mode and main menu is displayed.
2. Refer to the list of detailed settings for your ERV wired remote controller on the next page,
and select the desired menu.
Using the
/
buttons, select a main menu number and press the Away button to enter the sub-menu
setting screen.
Using the
/
buttons, select a sub-menu number and press the Away button to enter data setting
screen.
When you enter the setting stage, the current setting is displayed.
Refer to the chart for data settings.
Using the
/
buttons, select the settings and press the Away button to move to the next setting.
Press the Set button to save the settings and exit to the sub-menu setting screen.
Press the Timer button to exit to normal mode.
• While setting the data, press the Mode or Away button to move the digit of SEG.
• If you press the Timer button while your are setting data, you can exit to the sub-menu setting
NOTE
stage without saving your changes.
SEG used
Main menu
Sub menu
Exit
and
ENGLISH-15
1
2
button at the same time for more than 3
Left and right
Up and down