Samsung MIM–B18BN User & Installation Manual page 37

6 Tracking completed message will appear.
Select Zone initialization mode you want.
No initialization: No zone information initialization will
be made.
Individual initialization: Initialize zone information as
individual mode.
- Individual mode: Arrange by indoor unit main address
on monitoring page.
Group initialization: Initialize zone information as group
mode.
- Group mode: Create group by indoor unit group
address (RMC) on monitoring page.
Individual mode and group mode can be changed in
[Zone Setting & Edit].
7 Page will be refreshed by clicking [OK]. Then you can
check tracking result.
Note If tracking is executed successfully while 'NEW' is set as
communication mode for each
channel, virtual OnOff controller will be assigned to each
channel.
If there is no searched oudoor unit, OnOff controller, SIM/
PIM, it is regarded as DVM
tracking failure.
If there are devices which have same address, first
searched device will be registered only.
※Searching order is not fixed.
The number of OnOff controller does not contain the
number of virtual OnOff controller.
Total number of indoor units includes general indoor
units, ERV, AHU, Fresh ducts, ERV PLUS, Hydro Unit,
Hydro Unit HT, DVM CHILLER and FCU Kit.
If you execute tracking, system setting will be
initialized.
If tracking result does not match with actual
installation information, there can be critical error in
additional functions such as power distribution.
Make sure that tracking information matches to actual
installation information after tracking.
If there are errors on indoor and outdoor units while
tracking, the units may not be matched.
37
E-