Samsung MIM–B18BN User & Installation Manual page 27

Note Factory setting is as follows.
- IP address: 192.168.0.100
- Default gateway: 192.168.0.1 - DNS server: 0.0.0.0
If you enabled the function by checking 'DHCP' , you can check changed network
information on the external LCD display.
If 'DHCP' is set, IP address from DHCP server will be displayed.
DMS2.5 gets automatically set IP address when you activate DHCP function.
When connecting DMS2.5 to S-NET series, you can connect them using the IP.
However the auto setting IP address can be changed by events such as network
environment of restart.
In this case, it may cause communication failure between S-NET series and
DMS2.5. Therefore it is not recommended to connect DMS2.5 using DHCP
address and S-NET series.
Refer to the user manual if you want to check other items of the system
environment setting, tracking which collects information about indoor and
outdoor units connected to DMS2.5, and setting for power distribution. To
download the user manual, select [User manual] after selecting [System
settings] menu.
This product must be used in a dedicated network
because it cannot respond to network attacks such as
hacking and viruses. When it is connected to the Internet
or an intranet (ex: an office LAN), it could be a risk of
illegal approach. Also, this may change it to a harmful
connection for other network devices. This is not the
responsibility of Samsung Electronics and not included in
compensation for the damage.
- Subnet mask address: 255.255.255.0
27
E-