Samsung MIM–B18BN User & Installation Manual page 39

Renaming the Device
1 Select [System Settings] menu and click [Tracking].
Click [Edit] on the bottom of tracking device list.
2
[Edit] will change to [Cancel].
When the type of the device is displayed, NEW communication address will be
shown with it.
Note If you press [Cancel] button, [Cancel] will change to [Edit], and the changed
name of device will be restored to original name.
3 Enter the device name, which is saved in the PBA of indoor unit and outdoor
unit, in the Device name field or enter the name, which is saved in the
DMS2.5, in the Name field.
You cannot use special symbols as Device name and Name.
The Name should be within 16 letters.
The Device name should be within 10 letters.
Select the check box beside 'Device name' if you want to use the name of the
device (that supports NEW communication) which is saved in the PBA
4 Click [Save] after setting is completed.
"Reading data from DMS2.5. Please wait. " message appears and saving is
completed. After that, tracking page with disabled items will be displayed
again.
If you click [Cancel], input fields are disabled and [Cancel] will change to
[Edit].
39
E-