Samsung MIM–B18BN User & Installation Manual page 78

LonWorks Gateway setting (Continued)
Setting the LonWorks Gateway
LonWorks Gateway Connection and Login
1 Click internet explorer icon(
2 When internet explorer window appears, enter IP address
(http://192.168.0.100) on the address bar then press [ENTER].
3 If it is the first time to access LonWorks Gateway, " Install Microsoft Silverlight"
message will appear.
If the Microsoft Silverlight has already been installed, the above message will
not appear.
4 Click [Run] button and continue installation.
After installation, access LonWorks Gateway again.
Silverlight operates normally with Windows 7 or later version. It may not
operate normally with previous version of Windows.
Enter ID and password when LonWorks Gateway main web page appears, Then
5
click [LOGIN].
If you use accounts with general authorization level to login, you cannot use
the LonWorks Gateway settings.
Depending on authorization level set by the administrator, access to some
functions may be restricted.
You can change authorization level settings from System settings
User authorization management.
To use the LonWorks Gateway functions, you must login with the ID that is
included in administration group. Factory default LonWorks Gateway ID is
'admin' and password is 'ac0530' .
Note Only authorized users can access web page.
Connection speed may slow down. Fewer than 5 concurrent users are
recommended.
LonWorks Gateway manager should change ID and password for security
and management.
Logout: If you want to logout, click [LOGOUT] on the top of the menu.
LonWorks Gateway will be ended.
If you use accounts with authorization level lower than management group or accounts
with general authorization level, you cannot access LonWorks Gateway settings.
If you cannot access LonWorks Gateway, consult the manager.
78
E-
) twice on your computer.