Setting the DMS2.5 (Continued)
32
E-
Setting Enable public IP
1
Select [System Settings] menu and click [System
environment setting].
2
Click [Edit] on Enable public IP section.
3
Select whether to use Public IP or not.
When you select 'Enable' , you must register the Public IP of
PCs or network devices to access DMS2.5 from the PCs or
network devices.
4
Click [Save].
Setting Public IP of upper controller
1
Select [System Settings] menu and click [System
environment setting].
2
Click [Edit] on Public IP of upper controller section.
3
Register the Public IP of PCs or network devices to access
DMS2.5 from the PCs or network devices.
Select 'Apply' after entering the Public IP to access
DMS2.5.
4
Click [Save].