Show Http - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show http

Displays web management configuration information.
show [ip] http
Syntax Definitions
ip
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show http
Web Management = on
Force SSL = on
Web Management Http Port = 80
Web Management Https Port = 443
output definitions
Web Management
Force SSL
Web Management Http Port
Web Management Https Port
Release History
Release 6.6.1; command was introduced.
page 8-8
Optional syntax. Using this optional syntax is the same as using the
show http command.
Indicates whether web management is enabled (on) or disabled (off) on
the switch.
Indicates whether Force SSL is enabled (on) or disabled (off) on the
switch. If this is set to on this means that SSL is forced on an HTTP
session and hence HTTPS protocol is negotiated between the client and
server. For example, an "http://switchname.com" URL will be redi-
rected to an "https://switchname.com" URL.
The port configured for the HTTP connection.
The port configured for a secure HTTP connection (SSL enabled).
OmniSwitch 6250 CLI Reference Guide
Web Management Commands
November 2009