Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 474

Related Commands
bridge mode
bridge hello time
bridge cist hello time
MIB Objects
vStpInsTable
vStpIns1x1VlanNumber
vStpInsMode
vStpInsBridgeHelloTime
page 16-34
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for changing the Spanning Tree hello time value for
the flat mode CIST instance or for a 1x1 mode VLAN instance.
Explicit command for changing the Spanning Tree hello time value for
the CIST instance when the switch is operating in either the flat or 1x1
mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009