Show Snmp Trap Filter - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

SNMP Commands

show snmp trap filter

Displays the current SNMP trap filter status.
show snmp trap filter
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
To display a list of traps and their ID numbers, use the
Examples
-> show snmp trap filter
ipAddress
-----------------------------------------+-----------------------------------
172.21.160.32
172.21.160.12
0300:0000:0000:0000:0211:d8ff:fe47:470b
0300:0000:0000:0000:0211:d8ff:fe47:470c
output definitions
IPAddress
TrapId List
Release History
Release 6.6.1; command was introduced.
Related Commands
snmp trap filter
show snmp trap config
OmniSwitch 6250 CLI Reference Guide
show snmp trap config
trapId list
1
no filter
4
no filter
IP address of the SNMP management station that recorded the traps.
Identification number for the traps being filtered.
Enables or disables SNMP trap filtering.
Displays the SNMP trap information, including trap ID numbers, trap
names, command families, and absorption rate.
November 2009
command.
3 4
5 6
page 10-27