Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 390

output definitions (continued)
Actor System Priority
Actor System Id
Actor Admin Key
Actor Oper Key
Partner Admin System
Priority
Partner Oper System Priority
Partner Admin System Id
Partner Oper System id
Partner Admin Key
Partner Oper Key
Attached Agg ID
Actor Port
Actor Port Priority
Partner Admin Port
Partner Oper Port
Partner Admin Port Priority
Partner Oper Port Priority
page 12-52
The actor system priority of this port. You can modify this parameter
with the lacp agg actor system priority
The actor system ID (i.e., MAC address) of this port. You can modify
this parameter with the lacp agg actor system id
12-26).
The actor administrative key value for this port. You can modify this
parameter with the lacp agg actor admin key
12-21).
The actor operational key associated with this port.
The administrative priority of the remote system to which this port is
attached. You can modify this parameter with the
admin system priority command (see
The operational priority of the remote system to which this port is
attached.
The administrative MAC address associated with the remote partner's
system ID. This value is used along with Partner Admin System Prior-
ity, Partner Admin Key, and Partner Admin Port Priority to manually
configure aggregation. You can modify this parameter with the
agg partner admin system id
The MAC address that corresponds to the remote partner's system ID.
The administrative value of the key for the remote partner. This value is
used along with Partner Admin System Priority, Partner Admin System,
Partner Admin Port, and Partner Admin Port Priority to manually con-
figure aggregation. You can modify this parameter with the
partner admin key command (see
The current operational value of the key for the protocol partner.
The ID of the aggregate group that the port has attached itself to. A
value of zero indicates that the port is not attached to an aggregate
group.
The port number locally assigned to this port.
The actor priority value assigned to the port. You can modify this
parameter with the lacp agg actor port priority
12-38).
The administrative value of the port number for the protocol partner.
This value is used along with Partner Admin System Priority, Partner
Admin System ID, Partner Admin Key, and Partner Admin Port Prior-
ity to manually configure aggregation. You can modify this parameter
with the lacp agg partner admin port
The operational port number assigned to the port by the port's protocol
partner.
The administrative port priority of the protocol partner. This value is
used along with Partner Admin System Priority, Partner Admin System
ID, and Partner Admin Key to manually configure aggregation.
You can modify this parameter with the
priority command (see page
The priority value assigned to the this port by the partner.
OmniSwitch 6250 CLI Reference Guide
Link Aggregation Commands
command (see
command (see
command (see
lacp agg partner
page 12-36).
command (see page 12-32).
page 12-34).
command (see
command (see
lacp agg partner admin port
12-42).
page 12-28).
page
page
lacp
lacp agg
page
page 12-40).
November 2009