System Time - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Chassis Management and Monitoring Commands

system time

Displays or modifies the switch's current system time.
system time [hh:mm:ss]
Syntax Definitions
hh:mm:ss
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify a new system time in the command line, the current system time will be displayed.
Examples
-> system time 14:30:00
-> system time
15:48:08
Release History
Release 6.6.1; command was introduced.
Related Commands
system date
system timezone
MIB Objects
systemServices
systemServicesTime
OmniSwitch 6250 CLI Reference Guide
The new time being specified for the system. To set this value, enter the
current time in 24-hour format, where hh is the hour, mm is the minutes,
and ss is the seconds. For example, 14:30:00.
Displays or modifies the switch's current system date.
Displays or modifies the time zone for the switch.
November 2009 page 2-7