Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 486

Related Commands
bridge mode
bridge forward delay
bridge cist forward delay
MIB Objects
vStpInsTable
vStpIns1x1VlanNumber
vStpInsMode
vStpInsBridgeForwardDelay
page 16-46
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for changing the Spanning Tree forward delay time
value for the flat mode CIST instance or for a 1x1 mode VLAN
instance.
Explicit command for changing the Spanning Tree forward delay time
value for the CIST instance when the switch is operating in either the
flat or 1x1 mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009