Who - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

who

Displays all active login sessions (e.g., Console, Telnet, FTP, HTTP, Secure Shell, and Secure Shell FTP).
who
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
You can identify your current login session by using IP address.
Examples
-> who
Session number = 0
User name = (at login),
Access type = console,
Access port = Local,
IP address = 0.0.0.0,
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
End-User profile
Session number = 5
User name = admin,
Access type = telnet,
Access port = NI,
IP address = 128.251.17.176,
Read-only domains
Read-only families
Read-Write domains
Read-Write families = ,
End-User profile
output definitions
Session Number
User name
Access type
Access port
page 6-30
= None,
= ,
= None,
=
= None,
= ,
= All ,
=
The session number assigned to the user.
User name.
Type of access protocol used to connect to the switch.
Switch port used for access during this session.
OmniSwitch 6250 CLI Reference Guide
Session Management Commands
November 2009