When You Have Problems Operating The Machine - Ricoh Aficio MP W3600 Operating Instructions Manual

When You Have Problems Operating the
Machine
The following chart gives explanations of common problems and messages.
If other messages appear, follow the instructions displayed.
Important
❒ Check the contact address and Serial No. of Machine shown in the Service
Call message (L), and then contact your service representative. If the contact
address is not shown, contact your sales representative.
Problem
Nothing happens when
the operation switch is
turned on.
Although the copier
screen appears when the
machine is turned on us-
ing the main power
switch, it cannot be
switched to another
screen by pressing the
{Scanner} key.
The machine has just
been turned on and the
User Tools screen is dis-
played, but the User
Tools menu has items
missing.
The main power indica-
tor continues blinking
and does not turn off
when pressed.
The display is off.
The display is off.
The display is off.
" Please wait. " ap-
pears.
Cause
The main power switch
is turned off.
Functions other than the
copier function are not
yet ready.
Functions other than the
copier function are not
yet ready. Time required
varies by function. Func-
tions appear in the User
Tools menu when they
become ready for use.
This occurs in the follow-
ing cases:
• The machine is com-
municating with ex-
ternal equipment.
• The hard disk is active.
The machine is in Energy
Saver mode.
The operation switch is
turned off.
The screen contrast knob is
turned to the dark position.
This message appears
when you turn on the op-
eration switch.

When You Have Problems Operating the Machine

Solution
Turn on the main power switch.
Wait a little longer.
Wait a little longer.
Check if the machine is communicating
with a computer.
Press the {Energy Saver} key to cancel
Energy Saver mode.
Turn on the operation switch.
Set the screen contrast knob to the light
position to see the display panel properly.
See "Control Panel", About This Machine.
Wait for the machine to get ready.
1
9