Programming The Ldap Server; To Program / Change The Ldap Server; To Enter An Identification Name - Ricoh Aficio MP W3600 Operating Instructions Manual

System Settings

Programming the LDAP server

This section describes how to specify the LDAP server settings.

To program / change the LDAP server

2
This section describes how to program / change the LDAP server.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [TNext] twice.
D
Press [Program / Change / Delete LDAP Server].
E
Check that [Program / Change] is selected.
F
Select the LDAP server you want to program or change.
When programming the server, select [Not Programmed].
G
Set each item as necessary.
H
Press [OK] after setting each item.
For details about LDAP server, see "Programming the LDAP server".
I
Press [Exit].
J
Press the {User Tools/Counter} key.
Reference
p.68 "Programming the LDAP server"

To enter an identification name

This section describes how to enter a identification name.
A
Press [Change] under "Name".
Register a name for the LDAP server that will appear on the server selection
screen of the LDAP search operation.
B
Enter the server's identification name.
C
Press [OK].
68