When You Have Problems Operating The Machine - Ricoh Pro C550EX Operating Instructions And Troubleshooting

1. When the Machine Does Not Operate As Wanted
When You Have Problems Operating the
Machine
1
This section describes common problems and messages.
If other messages appear, follow the instructions displayed.
Problem
Although the copier screen
appears when the machine is
turned on using the main
power switch, it cannot be
switched to another screen by
pressing the [Document
Server] or [fiery driven] key.
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
The operation switch
indicator continues blinking
and does not turn off when
pressed.
The display is off.
The display is off.
Nothing happens when the
operation switch is turned on.
18
Cause
Functions other than the
copier function are not yet
ready.
Functions other than the
copier function are not yet
ready. Time required varies
by function. Functions appear
in the User Tools menu when
they become ready for use.
This occurs in the following
cases:
• The ADF is open.
• The machine is
communicating with
external equipment.
• The hard disk is active.
• The machine is cooling
down.
The machine is in Energy
Saver mode.
The operation switch is turned
off.
The main power switch is
turned off.
Solution
Wait a little longer.
Wait a little longer.
Close the ADF, and check if the machine
is communicating with external
equipment.
Press the [Energy Saver] key to cancel
Energy Saver mode.
Turn on the operation switch.
Turn on the main power switch.