Unusable Paper - Ricoh Aficio MP W3600 Operating Instructions Manual

Appendix
Paper roll
• If humidity is high, and the paper roll has expanded due to moisture, be sure
to cut off approximately 1000 mm (40"), before making copies or printing.
• Use a paper roll that has a black core.
• When a paper roll of 90 g/m
there is little paper left on the roll, image may be faint near the leading and/or
trailing edge, or an image may be doubled. To prevent this, set 3-5 mm (0.11"-
0.19") margins from the leading and trailing edges.
3
Reference
"Margin Adjustment", Copy/Document Server Reference
Notes on using translucent paper
Smooth out any curls in the paper before loading it.
Load translucent paper lengthways when possible.
Hemmed paper
When using hemmed paper, wrinkles and other problems may occur on paper.
Use the following procedure when copying or printing onto hemmed paper:
• Use the bypass tray.
• Make sure the paper is straight, and align the paper guides of the bypass tray
to the paper size.
• Load only one sheet at a time.
• Remove each paper from the output tray and place it on a flat surface.
Note
❒ Due to the thickness of hemmed paper, image may be faint, blurred, or wrin-
kled, and paper jams may occur. You may be able to prevent this by copying
or printing on the rear surface of the paper or feeding the bottom of the paper
in first.
Reference
"Copying from the Bypass Tray", Copy/Document Server Reference

Unusable Paper

This section describes paper unusable on this machine.
R CAUTION:
• Do not use aluminum foil, carbon paper, or similar conductive paper to
avoid a fire or machine failure.
68
2
(24 lb) or 110 g/m
2
(29.3 lb) paper is used and