When A Message Appears; Status Messages - Ricoh Aficio MP W3600 Operating Instructions Manual

Troubleshooting When Using the Printer Function

When a Message Appears

This section describes the principal messages that appear on the panel display.
If a message not described here appears, act according to the message.
Note
❒ Before turning the main power off, see "Turning On the Power", About This
Machine.
Reference
3 "Turning On the Power", About This Machine

Status Messages

This section describes the machine status messages.
Ready
Waiting...
Offline
Please wait.
Job Suspended...
Hex Dump Mode
Resetting job...
Setting change...
30
Message
This is the default ready message. The machine is ready
for use. No action is required.
The machine is waiting for the next data to print. Wait a
while.
The machine is offline. To start printing, switch the ma-
chine online by pressing [Online].
This message might appear for a second or two while the
machine is preparing, performing initial adjustments, or
adding toner. Wait a while.
All jobs in the machine are suspended. Wait a while.
In the Hex Dump mode, the machine receives data in
hexadecimal format. Turn off the machine after printing,
and then turn back on.
The machine is resetting the print job. Wait until
" " appears on the display panel.
Ready
The machine is setting changing. You cannot use the con-
trol panel while this message is displayed. Wait a while.
Status