Timer Settings - Ricoh Aficio MP W3600 Operating Instructions Manual

System Settings

Timer Settings

This section describes the user tools in the Timer Settings menu under System
Settings.
Default settings are shown in bold type.
❖ Auto Off Timer
2
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
"Auto Off". The machine status after the Auto Off operation is referred to as
"Off mode", or "Sleep mode". For the Auto Off Timer, specify the time to
elapse before Auto Off.
The default setting is 14 min..
The time can be set between 10 seconds and 240 minutes, using the number
keys.
The machine takes about 2 minutes to reach operation readiness after turning
the power on or leaving sleep mode.
Auto Off may not work when error messages appear.
❖ Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power
mode after copying has finished or the last operation is performed.
The default setting is 7 min..
The time can be set from 1 to 240 minutes, using the number keys.
❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
The warm up time for making a copy from standby mode is 3 seconds for
Panel off Level 1 and 15 seconds for Panel off Level 2.
The default setting is On, 1 min..
The time can be set between 10 seconds and 240 minutes, using the number
keys.
❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
The default setting is On, 60 second(s).
The time can be set from 10 to 999 seconds, using the number keys.
❖ Copier / Document Server Auto Reset Timer
Specifies the time to elapse before copier and Document Server modes reset.
The default setting is On, 60 second(s).
The time can be set from 10 to 999 seconds, using the number keys.
If [Off] is selected, the machine does not automatically switch to the user code
entry screen.
46