Ricoh Aficio MP W3600 Operating Instructions Manual page 313

Hide thumbs Also See for Aficio MP W3600:
Table of Contents

Advertisement

Problem
Original images are
printed on the reverse
side of the paper.
Misfeeds occur frequently. The cut paper tray's side
Misfeeds occur frequently. Paper is wrinkled or
Misfeeds occur frequently. Jammed or torn paper is
Misfeeds occur frequently. You may have loaded pa-
An error C message re-
mains, even if misfed pa-
per is removed.
Originals jam frequently. Originals are curled.
Cause
You may have loaded
the paper incorrectly.
fences, back fence, or
side-end fences, might
not be set properly.
folded.
inside the machine.
per of a size different from
the paper size settings.
You did not open and
close the upper section of
the fusing unit.
When You Have Problems Operating the Machine
Solution
Load paper correctly. Load paper into
the cut paper tray print side down, and
into the bypass tray print side up. See
p.57 "Loading Paper".
• Remove the paper. See p.67 "Remov-
ing Jammed Paper".
• Check the side fences, back fence,
and side-end fences are set properly.
See p.61 "Changing the Paper Size".
Cut folded or wrinkled areas off the pa-
per roll.
Remove cut paper that is folded or wrinkled.
Remove the paper, as necessary. See
p.67 "Removing Jammed Paper".
• Remove the paper. See p.67 "Remov-
ing Jammed Paper".
• Use Tray Paper Size Settings to set
the paper size. See "Tray Paper Set-
tings", General Settings Guide and
"Copy Paper", About This Machine.
When a misfeed C message appears, it
remains until you open and close the
upper section of the fusing unit. Open
the fusing unit cover in the back, and
then the upper section of the fusing unit
to check if any paper remains inside. See
p.67 "Removing Jammed Paper".
Smooth out any curls and try again.
1
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio mp w2400

Table of Contents