When A Job Is Not Performed - Ricoh Aficio MP W3600 Operating Instructions Manual

When the Machine Does Not Operate As Wanted

When a Job Is Not Performed

If you cannot execute a function, it may be that the machine is being held up by
another function.
1
If you cannot execute a function, terminate any other functions currently active,
and then try executing the function again. In certain cases, you can carry out an-
other job (copier, document server, printer, scanner) without canceling the cur-
rent job being performed. Performing multiple functions simultaneously like
this is called "Multi-accessing".
Combination Chart
❖ Function Compatibility
The chart shows Function Compatibility when print priority is set to "Inter-
leave". See "General Features", General Settings Guide.
: Simultaneous operations are possible.
: Operation is enabled when the relevant function key is pressed and re-
mote switching (of the scanner/external extension) is done.
: Operation is enabled when the {Interrupt} key is pressed to interrupt the
preceding operation.
→ : Operation is performed automatically once the preceding operation ends.
× : The operation must be started once the preceding operation ends. (Simul-
taneous operations are not possible.)
Mode before you select
Copy Operations for
Copying
Copying
14
Mode after you select
×
*1
×
→
*1
×
*2 *2