Scan Settings - Ricoh Aficio MP W3600 Operating Instructions Manual

Scan Settings

This section describes the user tools in the Scan Settings menu under Scanner
Features.
Default settings are shown in bold type.
❖ Next Original Wait Setting
To divide originals and scanning them individually to make a single file, se-
lect [Off], [Set Wait Time], or [Continuous Wait] for the waiting status.
The default setting is Set Wait Time.
The default setting time is 60 sec..
If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing
additional originals with the number keys. Scanning will start if additional
originals are placed and the {Start} key is pressed within this time. You can
end scanning and begin transmission by pressing the {q} key within this
time. Once the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for additional originals
until the {q} key is pressed. Scanning will start when additional originals
are placed and the {Start} key is pressed. You can end scanning and begin
sending by pressing the {q} key.
If a paper misfeed occurs or any of the following operations are performed
while the machine is waiting for additional originals, the countdown stops
and does not start again until the {q} key is pressed.
• Changing the settings such as the scan settings
• Opening the scanner cover
• Pressing the {Interrupt} key to activate the copy mode
Reference
p.3 "Accessing User Tools"
"Scan Settings", Scanner Reference
"Scan Size", Scanner Reference
Scan Settings
5
109