2.10 Protocol Dependent Ethernet Setup; Figure 2-17 Menu 3.1 - General Ethernet Setup - ZyXEL Communications PRESTIGE 100 - VERSION 2.20 User Manual

2.9.1 General Ethernet Setup
This menu allows you to select your Ethernet interface, either 10BaseT or AUI for the Prestige
100 (only 10BaseT for the Prestige 100IH, so this field does not appear) and specify the filter
sets that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic,
however, the filter sets may be useful to block certain packets, reduce traffic and prevent security
breaches.
If you need to define filters, please read Chapter 8- Filter Set Configuration, then return to this
menu to define the filter sets.

2.10 Protocol Dependent Ethernet Setup

For TCP/IP Ethernet setup refer to Chapter 3 - Internet Access Application.
Hardware Installation and Setup
Menu 3.1 - General Ethernet Setup
Ethernet Interface=
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:

Figure 2-17 Menu 3.1 - General Ethernet Setup

Prestige 100 and 100IH ISDN Router and Router/Hub
10BaseT
2
2-21