Changing Video Output — Ntsc And Pal - Lorex LHA4100 series Instruction Manual

12 Using the Main Menu
1. Under System, click General to open the General tab.
2. Select a time period from the dropdown next to Menu Timeouts.
• 30s–10min: Menus will disappear after the set time period if there is no activity on
the system.
• OFF: Menus will never time-out due to inactivity.
3. Click Save.
12.5.4 Changing Video Output — NTSC and PAL
Manually switch between NTSC and PAL video output.
NOTE
The video output is determined intelligently based on the region you set during the setup wizard. Ensure
your region has been set correctly before manually changing the video output (see 12.5.6 Configuring
NTP, page 81 for more details on changing the region).
To change the video output:
#LX400086; r. 1.0/39246/39246; en-US
79