View System Information; View Channel Information - Lorex LHA4100 series Instruction Manual

12 Using the Main Menu
4. If needed, use the dropdown next to Time Zone to set the correct region.
NOTE
In most cases, the region should already be correct as it was configured during the DVR setup wiz-
ard. In addition to determining the time zone, the selected region is also used by the system to intelli-
gently determine the correct video format (NTSC or PAL) for that region, which may change
automatically when changing the region. For example, changing the region from New York to London
will also switch the video format of the system from NTSC to PAL.
5. Click Update Now to sync with the NTP.
NOTE
If the video format changes between NTSC and PAL based on your new choice of region, the DVR
will reboot automatically.

12.5.7 View System Information

View system information such as device ID, IP address, MAC address, model number,
firmware version and more.
To view system information:
1. Under System, click Info to open the Info tab.
OR
From live view, click

12.5.8 View Channel Information

View channel information for each connected camera such as alias, mainstream and sub-
stream recording specifications.
To view channel information:
#LX400086; r. 1.0/39246/39246; en-US
on the Taskbar along the bottom of the screen.
82