Configuring System Warning Settings - Lorex LHA4100 series Instruction Manual

12 Using the Main Menu
1. Under Advanced, click Maintenance to open the Maintenance tab.
2. Click Load Settings.
3. The drive menu appears and displays the contents of the USB flash drive.
• Navigate to the system settings file you want to import, then click OK to begin.
• A warning message appears to inform you the system will reboot in order to properly
import your saved settings. Click OK to proceed.
NOTE
For more details on using the drive menu, including a full overview of buttons and their functions, see
10.1 Drive Menu Controls, page 32.

12.6.5 Configuring System Warning Settings

Set preferences for system warnings including video loss, hard drive errors, and warnings
when the hard drive is full.
To configure system warning settings:
1. Under Advanced, click Events to open the Events tab.
2. Use the dropdown next to Event Type to select the system warning you would like to
configure.
3. Check Enable to enable the selected event type.
4. Check Show Message to show a message on DVR's the on-screen display.
5. Check Send Email to send an email notification.
NOTE
Enabling Send Email requires you to set up email notifications. See 12.2.16 Setting up Email Notifi-
cations, page 65 for full instructions.
6. Use the dropdown next to Buzzer to have the DVR make an alarm sound when the se-
lected system warning occurs, or select OFF to have the DVR remain silent.
7. Click Save.
8. (OPTIONAL) Use the Copy function to copy your settings to another or all system
warning types.
#LX400086; r. 1.0/39246/39246; en-US
89